
HaLowLink 2 comes preconfigured as a router with a Wi-Fi HaLow access point. Users can switch to other supported configurations through the built-in setup wizard.
Powered by Morse Micro MM8108, HaLowLink 2 supports up to 8 MHz bandwidth and 43.3 Mbps PHY rate for faster transmission of data, images, audio and video.
Sub-1 GHz Wi-Fi HaLow extends wireless coverage up to 1 km line-of-sight, making it suitable for wide-area and remote connectivity.
Dedicated MM8108 HaLow and MediaTek MT7603E 2.4 GHz radios combine long-range backhaul with familiar Wi-Fi access. Pair two HaLowLink 2 units and use the remote Extender to provide 2.4 GHz Wi-Fi for standard Wi-Fi devices.
HaLowLink 2 is available in region-specific versions for supported markets. Operating frequencies, channel availability, transmit power, and antennas vary by region. Please select the appropriate model for your country or region.
Configure operating modes, HaLow and network settings directly from the Web UI. Built on OpenWrt 23.05, HaLowLink 2 also supports SSH/CLI for deeper control.
| Category | Specification |
| Processor & Memory | CPU: MediaTek MT7621 |
| Memory: 256 MB DRAM | |
| Storage: 32 MB NAND Flash | |
| Wi-Fi HaLow | Standard: IEEE 802.11ah |
| Module: AzureWave AW-HM677 | |
| Radio: Morse Micro MM8108 | |
| Channel Bandwidth: 1 / 2 / 4 / 8 MHz | |
| TX Power: Up to 26 dBm | |
| 2.4 GHz Wi-Fi | Standard: IEEE 802.11n |
| Radio: MediaTek MT7603E | |
| Configuration: 2 × 2 with internal antennas | |
| Network Modes | Wi-Fi HaLow Router |
| Access Point | |
| Extender | |
| Interfaces | Ethernet: 2 × Gigabit Ethernet ports |
| USB-C: 1 × USB-C port for power and Ethernet data | |
| Antenna Connector: SMA | |
| Control: Mode button | |
| Power | Input Voltage: 5 V |
| Input Current: 2 A | |
| Operating Environment | Operating Temperature: 0–40 °C |
| Operating Humidity: 5–95% RH, non-condensing | |
| Physical Specifications | Dimensions: 88 × 68 × 24 mm |
| Device Weight: 102 g | |
| Weight with Stand and Antenna: 168 g | |
| Software | Operating System: OpenWrt 23.05 |
| Configuration: Web UI and SSH/CLI | |
| Regional Support | EU (including UK) TX Power Limit: 14 dBm |
| Japan TX Power Limit: 16 dBm | |
| Certification | Wi-Fi CERTIFIED HaLow™,FCC,CE,TELEC |
1. Remote Site Connectivity
Extend network access to remote sites for laptops, phones, cameras, and other connected devices.
2. Smart Agriculture
Connect sensors, cameras, and field equipment across large farms for centralized monitoring and management.
3. Industrial & Utility Networks
Connect equipment, sensors, and control devices across large industrial and utility sites.
4. Outdoor & Temporary Networks
Provide network access for phones, laptops, cameras, and IoT devices in outdoor or temporary locations.
| HSCODE | 8517623600 |
| USHSCODE | 8517620090 |
| UPC | |
| EUHSCODE | 8517620000 |
| COO | CHINA |
| HaLowLink 2 | x1 |
| HaLowLink 2 Stand | x1 |
| Region-Specific Wi-Fi HaLow Antenna | x1 |
| Power Adapter | x1 |
| Region-Specific Power Plug | x4 |
| USB-C to USB-C Cable | x1 |
| Ethernet Cable | x1 |
HaLowLink 2 is a ready-to-use Wi-Fi HaLow gateway that combines long-range Sub-1 GHz IEEE 802.11ah connectivity with everyday 2.4 GHz Wi-Fi in one compact device. Powered by the Morse Micro MM8108, it supports up to 8 MHz bandwidth and a maximum PHY rate of 43.3 Mbps for richer data applications beyond traditional low-rate IoT. Preconfigured Router, Access Point and Extender modes, together with an intuitive Web UI, make long-range network deployment simple without requiring users to build or configure a HaLow software stack from scratch.